Router>
Router>enable
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#hostname Branch
Branch(config)#enable secret cisco
Branch(config)#line console 0
Branch(config-line)#password class2025
Branch(config-line)#loginh
                         ^
% Invalid input detected at '^' marker.

Branch(config-line)#login
Branch(config-line)#exit
Branch(config)#line vty 0 4
Branch(config-line)#password cisco2025
Branch(config-line)#login
Branch(config-line)#disable domain-lookup
                       ^
% Invalid input detected at '^' marker.

Branch(config-line)#help
Help may be requested at any point in a command by entering
a question mark '?'.  If nothing matches, the help list will
be empty and you must backup until entering a '?' shows the
available options.
Two styles of help are provided:
1. Full help is available when you are ready to enter a
   command argument (e.g. 'show ?') and describes each possible
   argument.
2. Partial help is provided when an abbreviated argument is entered
   and you want to know what arguments match the input
   (e.g. 'show pr?'.)

Branch(config-line)#disable?
% Unrecognized command
Branch(config-line)#disable
                       ^
% Invalid input detected at '^' marker.

Branch(config-line)#domain-lookup?
domain-lookup

Branch(config-line)#domain-lookup
Branch(config-line)#domain-lookup
Branch(config-line)#domain-lookup disable
                                  ^
% Invalid input detected at '^' marker.

Branch(config-line)#clear
                    ^
% Invalid input detected at '^' marker.

Branch(config-line)#banner motd #No Unauthorised Acces#
Branch(config)#exit
Branch#
*Jan  9 11:19:00.483: %SYS-5-CONFIG_I: Configured from console by console
Branch#interface serial0/0/0
        ^
% Invalid input detected at '^' marker.

Branch#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Branch(config)#interface serial0/0/0
Branch(config-if)#loopback 1
                           ^
% Invalid input detected at '^' marker.

Branch(config-if)#loopbacl-interface 1
                         ^
% Invalid input detected at '^' marker.

Branch(config-if)#loopback-interface 1
                          ^
% Invalid input detected at '^' marker.

Branch(config-if)#ip address 1.1.1.253 255.255.255.252
Branch(config-if)#ipv6 address 2001:0db8:cafe:1::1/64
Branch(config-if)#no shutdown
Branch(config-if)#
*Jan  9 11:25:35.595: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to down
*Jan  9 11:25:41.023: %LINK-3-UPDOWN: Interface Serial0/0/0, changed state to up
*Jan  9 11:25:42.023: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
*Jan  9 11:25:43.027: %IPV6_ND-4-DUPLICATE: Duplicate address 2001:DB8:CAFE:1::1 on Serial0/0/0
Branch(config-if)#interface gig0/0
Branch(config-if)#ip address 172.16.1.1 255.255.255.0
Branch(config-if)#no shutdown
Branch(config-if)#
*Jan  9 11:31:02.407: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
*Jan  9 11:31:03.407: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
Branch(config-if)#interface lo10
Branch(config-if)#
*Jan  9 11:33:43.839: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback10, changed state to up
Branch(config-if)#ip address 10.10.10.1 255.255.255.0
Branch(config-if)#no shutdonw
                           ^
% Invalid input detected at '^' marker.

Branch(config-if)#no shutdown
Branch(config-if)#interface lo11
Branch(config-if)#
*Jan  9 11:34:38.411: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback11, changed state to up
Branch(config-if)#ip address 11.11.11.1 255.255.255.192
Branch(config-if)#no shutdown
Branch(config-if)#interface Lo46
Branch(config-if)#
*Jan  9 11:36:06.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback46, changed state to up
Branch(config-if)#ip address 192.168.46.129
% Incomplete command.

Branch(config-if)#ip address 192.168.46.129 255.255.255.224
Branch(config-if)#ipv6 address 2001:0db8:beef:B::1/64
Branch(config-if)#no shutdown
Branch(config-if)#ipv6 unicast-routing
Branch(config)#

































Branch con0 is now available





Press RETURN to get started.







*Jan  9 11:50:48.699: %SYS-5-CONFIG_I: Configured from console by consoleNo Unauthorised Acces

User Access Verification

Password:
Branch>show ip interface brief
Interface                  IP-Address      OK? Method Status                Protocol
Embedded-Service-Engine0/0 unassigned      YES unset  administratively down down
GigabitEthernet0/0         172.16.1.1      YES manual up                    up
GigabitEthernet0/1         unassigned      YES unset  administratively down down
Serial0/0/0                1.1.1.253       YES manual up                    up
Serial0/0/1                unassigned      YES unset  administratively down down
Loopback10                 10.10.10.1      YES manual up                    up
Loopback11                 11.11.11.1      YES manual up                    up
Loopback46                 192.168.46.129  YES manual up                    up
Branch>config t
          ^
% Invalid input detected at '^' marker.

Branch>enable
Password:
Password:
Password:
% Bad secrets

Branch>enable
Password:
Password:
Branch#disable secret cisco
               ^
% Invalid input detected at '^' marker.

Branch#disable secret
               ^
% Invalid input detected at '^' marker.

Branch#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Branch(config)#no enable secret cisco
Branch(config)#exit
Branch#
*Jan  9 11:55:49.951: %SYS-5-CONFIG_I: Configured from console by console
Branch#router rip
           ^
% Invalid input detected at '^' marker.

Branch#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Branch(config)#router rip
Branch(config-router)#version 2
Branch(config-router)#network enable
                              ^
% Invalid input detected at '^' marker.

Branch(config-router)#network 172.16.1.1
Branch(config-router)#
Branch(config-router)#exit
Branch(config)#interface vlan 1
                          ^
% Invalid input detected at '^' marker.

Branch(config)#interface vlan1
                          ^
% Invalid input detected at '^' marker.

Branch(config)#interface vlan
                          ^
% Invalid input detected at '^' marker.

Branch(config)#interface vlan 1
                          ^
% Invalid input detected at '^' marker.

 ranch(config)#interface vlan 1
% Incomplete command.

Branch(config)#
Branch(config)#no auto-summary
                      ^
% Invalid input detected at '^' marker.

Branch(config)#exit
Branch#no auto
*Jan  9 12:12:06.967: %SYS-5-CONFIG_I: Configured from console by
Branch#no auto-summary
          ^
% Invalid input detected at '^' marker.

Branch#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Branch(config)#exit
Branch#
*Jan  9 12:14:31.803: %SYS-5-CONFIG_I: Configured from console by console
Branch#exit
